1～15 item / All 36 items
Infrared (IR) Sensor TO-46 (18) Sensor Package
The ZTP-148SR infrared (IR) sensor consists of a thermal element, a flat infrared filter, and a thermistor for temperature compensation, all housed in a single sealed TO-46 (18) sensor package. To maximize performance for specific applications, various filters are available, and the thermopile IR sensor is used for non-contact surface or infrared temperature measurements.
Infrared sensor for visitor counter PLC-6SR
■Features ●Embedded infrared sensor for visitor counters (real-time output type) ●Can be installed in a small space with a compact and slim sensor head. ●Ultra-compact controller ●Detection distance can reach up to 6m. (When using the optional item BS-10N, it can reach up to 10m.)
Outdoor reflective infrared sensor with one-sided wiring, capable of monitoring up to 30 meters.
■ With convenient one-sided wiring, outdoor monitoring up to 30m is possible! This is a reflective infrared sensor that integrates the projector and receiver. Since the wiring is only for the sensor body (one-sided wiring), it is recommended for places where dual-sided wiring is difficult. Additionally, it is easy to maintain. ■ By using a distance measurement method, it reliably detects targets Not only does it monitor the amount of light reflected back from the light projected by the sensor, but it also measures the distance based on the time it takes for the light to return. This makes it less susceptible to the influence of the surrounding environment, materials, or colors of the target, ensuring reliable detection. It also prevents missed detections caused by light reflection from walls in the middle of the monitored area. ■ Can be installed both outdoors and indoors Installation can be done regardless of whether it is outdoors or indoors. It can monitor up to 40m indoors, and the reflector hood can also be removed.
Direct reflection type infrared sensor capable of motion detection.
■Direct Reflection Type Without Reflector Since it adopts a direct reflection method, a reflector is not required. ■Convenient Sensitivity Adjustment Volume Equipped with a sensitivity adjustment volume that allows you to adjust sensitivity according to the installation location. (It is set at the factory to detect a human body at 1 meter.) ■Wide Range of Applications It can accommodate a wide range of applications that require stationary detection. ■Easy Installation This is a reflection-type sensor with an integrated light-emitting and light-receiving unit, so installation and wiring can be done with just the main unit. ■User-Friendly Design ● It has a thin and compact size of 23.5mm in thickness. ● It has terminal connections, making wiring connections easy. ● It can be used as an embedded type by using an embedded plate (BP-5B, BP-5D: sold separately). ● Using L brackets (BL-5: sold separately) further expands its applications. ■Cautions for Using This Sensor Please note that this sensor may not detect the following types of objects due to its operating principle: ● Objects with a shiny surface close to a mirror finish. ● Objects with an extremely low light reflectance. 【Examples】 Clothing made of black wool, black shiny suits or scarves, leather products, laser-coated items.
Infrared sensor ideal for spot surveillance at entrances, exits, and corridors.
■Ceiling or wall mounting options available It can be used for both ceiling and wall mounting, allowing for flexible installation locations. Its rounded, calm design matches well in various settings. ■Ideal for entrances, windows, and corridors It can be installed on door frames or walls, making it perfect for spot monitoring at entrances, windows, and corridors. It can also be used in semi-outdoor areas (places not directly exposed to rain). ■Adjustable monitoring area The width of the monitoring area can be adjusted easily with a built-in lever. Additionally, the depth of the area can be adjusted with a switch for quick changes. ■Countermeasures against stray light With a special filter that efficiently cuts visible light and unique measures against stray light, it is minimally affected by external light interference. ■User-friendly design ● Comes with a sensitivity adjustment volume that can be adjusted according to the installation location. ● Equipped with an operation indicator light for convenient operation confirmation (red LED lights up during an alarm).
The dual-beam opposing infrared sensor has evolved into a new era! An infrared sensor packed with patented technology creates safety and trust!
■Strong against ambient light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong against harsh environments (Two-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-saving design (Low current consumption) Compared to conventional products (PB-TE series), current consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (Compliance with RoHS directive) It complies with the environmentally conscious RoHS directive. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, and diisobutyl phthalate) ■Insect-resistant structure (Insect-proof and drip-proof design) With insect-proof bushings that envelop the wires and a waterproof structure, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water compared to our conventional products.
The dual-beam opposing infrared sensor has evolved into a new era! An infrared sensor packed with patented technology creates safety and trust!
■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong in harsh environments (2-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-saving design (low current consumption) Compared to conventional products (PB-TE series), current consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (compliant with RoHS directive) It complies with the environmentally friendly RoHS directive. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, and diisobutyl phthalate.) ■Structure resistant to insect intrusion (insect-proof and drip-proof design) With insect-proof bushings that envelop the wires and a waterproof structure, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water (compared to our conventional products).
High-reliability two-stage beam type indoor embedded infrared sensor.
■Simultaneous Two-Beam Blocking Method The AND method does not trigger an alarm unless both infrared beams in the upper and lower sections are blocked simultaneously, significantly reducing false alarms caused by indoor insects and other factors. ■Modulation Frequency Switching Function This feature is effective when multiple units are installed. By switching the modulation frequency of the pulse beams from the transmitter and receiver, mutual interference is prevented. (Switching between modulation frequencies from 1ch to 4ch is possible.) ■Variable Response Speed Function The light-blocking response speed can be adjusted from 0.05 to 0.7 seconds using a variable volume control. This allows for countermeasures against false alarms tailored to the specific site. ■User-Friendly Design - Equipped with an AGC (Automatic Gain Control) circuit. - Includes a monitor jack.
The highest quality infrared sensor that connects stability and trust, compatible with environmental and eco-friendly needs. The pole cover that came with the PXB-HF has been removed.
■Dual Modulation Method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with a sensitivity margin of 100 times and a distance margin of 10 times, we reduce the risk of malfunction in adverse weather conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce malfunctions caused by birds and fallen leaves. ■Energy-Saving Design We have significantly reduced the current consumption. (Less than 50% compared to our previous models) This allows for the use of a smaller power supply than before, eliminating the need for thick wiring even for long-distance connections, thereby greatly reducing wiring material costs. ■Green Design We comply with the environmentally conscious RoHS directive. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.
The highest quality infrared sensor connecting stability and trust, compatible with environmental and eco-friendly standards. The pole cover that came with the PXB-HF has been removed.
■Dual Modulation Method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce false triggering in adverse environmental conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce false triggering caused by birds and fallen leaves. ■Energy-Saving Design We have significantly reduced the current consumption (to less than 50% of our previous models). This allows for the use of a smaller power supply than before, eliminating the need for thick wiring even in long-distance installations, thereby greatly reducing wiring material costs. ■Green Design We comply with the RoHS directive, which considers environmental impact. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.
With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.
■Strong against lightning (Enhanced lightning protection) To reduce damage from induced lightning, surge resistance performance has been strengthened. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings that envelop the wires and dedicated gaskets, we achieve high dust, drip, and insect protection (equivalent to IP65). The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water through the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) Power consumption has been significantly reduced (to less than 50% compared to our conventional models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, which greatly reduces wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on a pole.
![Infrared Sensor [Salt Damage Countermeasure Product] PXB-100ATC](https://image.mono.ipros.com/public/product/image/20b/2000743169/IPROS32818892429661317547.jpeg?w=280&h=280)
Achieve security tailored to the security level with two types of signals: "independent detection of upper and lower sections" and "simultaneous shutdown and light-blocking detection of upper and lower sections."
■Independent Detection of Upper and Lower Sections When using AT output, the upper and lower sections function as independent sensors with a two-beam system, allowing detection by simply obstructing one beam. *To prevent false detection from birds and other sources, the detection response time is set longer compared to when both sections are obstructed. ■AT and HF Outputs It is equipped with two types of detection outputs: AT output, which can detect pass-through, and HF output, which only detects simultaneous obstruction of the four beams in the upper and lower sections, enabling appropriate vigilance according to the situation and environment. ■Synchronous Multi-Stage Vigilance By synchronizing the timing of light emission and light reception, it is possible to perform more reliable multi-stage vigilance. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for infrared beams, it enhances the distinguishability from ambient light (such as sunlight and car headlights), achieving reliable outdoor vigilance. ■Green Design It complies with the RoHS directive, which considers environmental impact. (Eliminating lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) (RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.)
Two-beam infrared sensor suitable for installation outdoors and indoors, ideal for simple uses such as home security.
■Simultaneous Two-Stage Beam Interruption Method By adopting an AND method that does not trigger an alarm unless both upper and lower infrared beams are interrupted simultaneously, false alarms caused by momentary interruptions with time delays, such as birds flying in or leaves falling, are significantly reduced. ■Modulation Frequency Switching Function This feature is effective when using multiple infrared sensors for linear surveillance or multi-stage monitoring. By switching the modulation frequency of the infrared pulse beam between high and low, it is possible to avoid bypassing. ■Home Security It can also be used for home security applications such as windows and fence boundaries, as well as for simpler specifications. ■Wide Beam Pitch The beam pitch is set to approximately 240mm, which greatly reduces false alarms caused by birds or falling leaves. ■Detection Response Time Adjustment The detection response speed can be adjusted with a volume control from 0.05 to 0.7 seconds. By setting a longer detection response time, it becomes less likely to trigger false alarms from falling leaves. However, be cautious as setting it too slow may result in failing to detect humans. ■Others ● The detection range is 15m outdoors and 30m indoors. ● Horizontal adjustment of the infrared light axis is possible (vertical adjustment is not). ● Wide light beam allows for easy axis adjustment.
Infrared Sensor PB-IN-200HFC
■4-Stage Power Beam Adopts a 4-stage beam simultaneous cutoff method to prevent malfunctions caused by small animals. It features a high-power beam with a distance margin of 10 times. ■Modulation Frequency Switching Function The modulation frequency can be switched among four levels, preventing infrared wrapping and mutual interference. ■Light Emission Power Switching Function The light emission power can be switched between two levels, allowing for efficient settings according to the surveillance distance. ■Auto Gain Lock Function Within the maximum surveillance distance, it automatically sets the optimal sensitivity margin for any surveillance distance. ■External Environment Diagnosis Function If the light reception level decreases due to weather changes such as dense fog, heavy rain, or snowfall, it will notify you through environmental output. ■Programmable AGC Function Automatically increases light reception sensitivity during adverse weather conditions like dense fog, heavy rain, or frost to prevent malfunctions. ■Alarm Memory Display Function Easily check the sensors that have triggered an alarm. You can choose between auto-reset and manual reset options. ■Sound Check Function Allows for adjustments and confirmations through sound during light axis adjustment, operation checks after installation, alarm memory display, and gain lock confirmation.
It detects when obstructing the invisible horizontal beam.
This is an example of intrusion prevention measures using infrared sensors installed on the fence and gate of a detached house. With infrared sensors installed on the fence and gate, you can feel secure whether you are at home or away.
